Ningbo haijiang machinery manufacturing co.,Ltd
Haijia Injection Machine,Energy Saving More
Add to Cart
Thermoplastic Bakelite injection molding machine pump motor power 55+55+55+55 kw Heater power 177 kw
The Characteristic Of HAIJIA Special Machine
Fast response
With steady capability, servo gearshift dynamical control system has equipped with pressure feedback device with high precision and sensitivity, which forms close-loop precision control, cycle time effectively shortened and improving production efficiency.
Oil temperature rise slowly
The system can restrain arising of oil temperature, so smaller oil cooling system can be used in the machine.
PQ control
Control pressure and flow simply by inputting simulated voltage of pressure & flow into the computer.
Low noise
Different from ordinary fixed pump injection molding machine, servo power-saving injection molding machine is working only when necessary. And working noise is less than LOG-A8 series, will be much quieter for your working area.
injection unit
Double cylinder injection system
High quality barrel and screw
Multi stages of speed, pressure and position for injection
Holding on and charging
Postion or time control changeover
Screw position electronic ruler control
Prevent the screw cold start
Low speed high torque motor
Nozzle center adjust
Stainless steel hopper
Water cooling for hopper throat
| Injection Unit | A B |
| Screw Diameter mm | 210 220 |
| Screw L/D Ratio L/D | 24 22.9 |
| Shot Size (Theoretical) cm3 | 40003 43904 |
| Injection Weight (PS) g | 36402 39953 |
| Injection Rate g/s | 2000 2200 |
| Injection Pressure Mpa | 155 141 |
| Screw Speed rpm | 50 |
| Clamping Unit | |
| Clamp Tonnage KN | 30000 |
| Toggle Stroke mm | 2000 |
| Space Between Tie Bars mm | 1900*1750 |
| Max.Mold Height mm | 1900 |
| Min.Mold Height mm | 1000 |
| Ejector Stroke mm | 450 |
| Ejector Tonnage KN | 565 |
| Others | |
| Max.Pump Pressure Mpa | 16 |
| Pump Motor Power KW | 55+55+55+55 |
| Heat Power KW | 177 |
| Machine Dimension m | 22*5.5*5 |
| Machine Weight t | 220 |
Bakelite injection molding machine,hydraulic components of eurpean and american brands with different circuit design ensure locking fast,low nosie,shortent the molding cycle,improve production efficiency